The High Blowout Taper: A Complete Guide to This Iconic Style
In case you desire a haircut that will attract attention, then the high blowout taper is the place to be. This style is a mixture of vintage volume and contemporary accuracy. It provides a clean cut appearance along its periphery but is longer and has a lot of texture on the top. You have the best of either side a professional finish and a fun and expressive silhouette.
Men who have thick, curly or wavy hair always have a hard time in finding a cut that can contain the bulk without compromising on the style. This can be solved very easily by the high blowout taper. It gets the sides and the back off but leaves the top hair shiny. This was a cut made popular in the 90s and 2000s, but now it has come back in its sophisticated, modern tone.
Barbers like this cut as they expose their diminishing abilities. Customers are fond of it as it is multi-purpose and can be styled using a hairdryer. Whether it is a barber who wants to master the technique or a client who is sitting in the chair, these are the mechanics of this cut and it is necessary to understand how it works. Continue to get the exact instructions on how to attain the perfect high blowout taper.
Understanding the High Blowout Taper
The high blowout taper is a variation of the already known blowout haircut. A classic blowout is based on the application of a hairdryer to blow the hair out and up. It gives a voluminous wind-swept effect. The sides and the neckline are referred to as the taper part. A taper is subtle unlike a skin fade which removes all the hair down to the skin up the entire length of the head. It has hair very short at the temple and at the back of the neck, but a little longer behind the ear which forms an arch.
The point of the transition is determined by the high aspect. A low taper is placed directly over the ear line or the neckline. In high taper, the barber initiates the blending procedure a lot higher on the temples and the back. This is a stronger contrast between the skin and dark hair. It makes the face look more hoisted and angular. The style is really effective with the round shapes of the face as the height on top and the tight sides stretch the face. It is a sizable decision that one needs to be confident to wear. A great deal of volume you must put about.
Step-by-Step Cutting Process
An effective haircut must have a rational map. The high blowout taper should be approached in a systematic fashion to be in a position to assure smoothness of the blend and balance in the shape. Begin by washing of the hair. A clean cut hair grows evenly and gives the real pattern of growth. Blow-dry the hair, be it a little damp so that it can be sectioned. Part the front hair and the side hair with clips. This sectioning of the horseshoe sets a strong boundary of the area in which you will fade and that which will be long.
The cut should start with removing mass on the sides and the back. The canvas can be cleared with a bigger clipper guard. This will make you visible the form of the head. When you have got the bulk out of the way, begin your instruction about the taper. Make your initial bald line at the nape and the temple. Be precise with your lines. The fade will be irregular in case the foundation is not straight. Climb the ladder of success. Bring the guidelines to extinction through scooping. This C-motion draws the clipper out of the head leaving the hair longer towards the uphill direction. Keep the brush in hand and clean the place all the time. Flaxed hair may conceal flaws. Lastly, polish the mixture with your detail brush and then proceed to the top.
Clipper Guards for the Sides
The trick of a blurry smooth fade is to select the correct clipper guards. In the case of a large blowout taper, you require a certain sequence of lengths. You can use your trimmer or a #00000 blade to achieve the bald line at the bottom of the sideburns and the neckline. This is what defines the skin level. Following this, fit the guard (#0.5) (1/16 inch) or fit the clipper lever open. Half an inch up, over your bald line. As you get up to the head of this section flick the clipper off.
Repeat with the next section with the #1 guard (1/8 inch). To begin with, close the lever, but progressively open it as you work up. This blends the #0.5 into the #1. Above that, use the #1.5 guard (3/16 inch). This guard plays a very important role in removing the line between the short taper and the bulk of the hair. Lastly, wear a guard (1/4 inch) or even a guard (3/8 inch) close to head beginning to curve (parietal ridges). This is a length that joins the decayed sides to the longer hair on top. Do not dig into the scalp. The clipper flat should be held against the head. Before applying any black touch-up powder, you must always be sure to look in the mirror and see dark spots or thick lines that will require additional blending.
Length in Inches for the Top
The upper section determines the personality of the blow out. To attain the signature volume, a lot of length is generally required. Majority of barbers suggest that the top hair should be at 3 to 5 inches. When you have hair that is less than 3 inches, you will not be able to hold the hair to stand up or fall back. With a long hair (more than 5 inches) the weight may make the style fall flat on the head unless you apply very high holding products.
The number of inches varies depending on the texture of the hair. Straight hair should be cut shorter by 3 or 4 inches in order to keep hefty. When dried, the curly hair looks shorter, thus you are supposed to cut it a little longer maybe 4 or 5 inches, to allow the pattern of the shape. When trimming the top, cut in the hair and not across the hair. Point cutting is used to add texture and take off weight of the tips. This gives it a ragged, airy appearance that fashions effortlessly. Make the hair go up in a 90 direction (Towards the head) so that there are equal layers. Attach the length on the top to the sides with the use of a scissor-over-comb technique. This makes the transition more soft and does not create a disconnection or a mushroom effect.
Blending the Back Section
The high blowout taper is a taper that is sometimes hardest at the back of the head. This is the occipital bone which sticks out and may form shadows in the fade. In case of a high taper you begin the transition much higher than the natural hairline. Draw a curve upon your trimmer, which will have a depression in the middle. This is a supplementary of the natural form of the neck. Clean below this line with the shaving razor, to a sharp finish.
Start to fade out at the bottom upwards. The same guard development as the sides (#0 to #2). You have to brush the fade out on a larger surface area than you did on the temples though. Spread the transition out. Compressing the fade too much will present itself with two lines, instead of a gradient. Be careful about the part behind the ears. This location can be covered with varying swirls or development patterns. Detail such tricky spots with the corner of your clipper blade. Get back and look at the symmetry. The fade on the right side of the neck has to be the same height and depth as the fade on the left. A blended back means that the haircut will be presentable in all directions, and not just the front.
The Final Look
The overall outcome must be a work of contrast and volume. The corners of the ears and the neck must be clean and sharp when you see yourself in the mirror. The skin must flow on to a dark dense blur of hair. It has to be free of lines of demarcation. The sides are to appear tight, accusing the jawline and cheekbones. This white canvas gives the top the center-stage.
This should be the top hair that is blown out or exploded. It must have a light movement and flow. You get this by applying a heat protectant and a round brush using a blow dryer. Turn the hair and the air in one way upwards and backwards. The hair must be able to maintain a shape when it is dry, to a large degree. Apply a matte pomade or texture powder. Rub the product in your hands and apply it on the roots to the ends. This locks in the volume. The form of the silhouette is masculine and square. It is a fashion that appears to be planned and dressed. Having a high blowout taper is a bonus, regardless of whether you are in a suit or gym wear, because it adds a certain deliberate style to your image. It makes it a haircut into a fashion statement. Blowout Taper long Hair.
